4 Water-Saving Gadgets Every Homeowner Should Have

0
1091

Conserving water is an essential practice that we all should do for the environment. Homeowners should be mindful of how they consume their water. They should consider doing so as a contribution to saving nature while reducing their consumption and decreasing their water bills in the process.

On top of discipline, several plumbing accessories have been developed to be able to save water. Here are some to name a few.

Low Flow Water Taps

Although it feels quite relaxing to see and experience a luxurious amount of water coming out of your taps, do you really think you need that much water to get the job done? The kitchen sink is one of the most frequently used areas in your home. Thus, it can easily be concluded that this area also happens to be the areas that wastes water the most. To avoid these, you can consider replacing your old taps with low flow faucets.

Average low flow taps can save around 1.5 gallons of water per minute, an average 32% reduction in your water use in comparison to the standard tap. The flow rate still meets the user’s everyday needs, while exceeding the requirements most green building code requires. A licensed plumber Summer Hill tradesman can easily install one for you.

Low Flow Showerheads

Another common area where water is usually wasted in one’s household is the bathroom area. Standard showerheads use around 2.5 gallons of water per minute. The longer you spend your time enjoying your shower, the more water you consume – and waste. For a 5-minute shower, you spend around 11 gallons of water.

Low flow showerheads release around 1.5 gallons of water per minute, sometimes even less. Thus, a five-minute shower will only consume 7.5 gallons of water – that 40% less than the average. The amount of water you save in the process accumulates to hundreds, or even thousands of gallons of water saved annually. You can easily get a low flow showerhead from your local plumbing store. To be sure, you can ask your local plumber to install it for you.

Automatic Shut Off Nozzles

Another additional accessory that you can install in your showers to reduce water consumption are nozzles. This accessory is located between the pipe and the showerhead. It can be operated by turning the valve with your thumb. Although it may seem to be against your usual habit, you can opt to turn our water off while you soap and shampoo. An automatic shutoff nozzle makes it possible by simply flipping a switch. You can turn it back on when you are ready to rinse.

Worried about the water temperature? It remains the same even while you shut off and turn on this device. You can also screw automatic shutoff nozzles on your water taps and garden hoses.

Dual Flush Toilet Converters 

Toilets consume the most water on an average Australian home. It contributes to around 30% of water use in the entire household. You can conserve water in this area by having a dual-flush toilet installed in your bathrooms. This plumbing accessory features a 0.5 gallons water release for urine and the standard 1.5 gallons for flushing down solid wastes.

You can seek help from a plumber in Summer Hill to install this piece or install it on your own. Remember to turn off the water supply first and drain your water closet tank before doing so. Unscrew the old flush valve and remove the old mechanism. Replace it with the dual flush accessory and then restore your water supply to test.

Saving water is easy to do if you are really focused on doing so. There are plenty of inexpensive options that can help you cut your water bill by half, or even more, while being stewards in conserving Earth’s limited resources.

Comments are closed.